SKU: DB3A0375 Category:
SKU: DB3A0375 Category:

IR04

4G LTE Cat 4 N300 Industrial Wi-Fi Router

A cellular Wi-Fi router with mobile connectivity for networking in harsh conditions such as moving vehicles, manufacturing, maritime, oil & gas, and mining.

  •  4G Cat. 4 with Max 150 Mbps DL 1
  •  2× SIM Slots
  •  300 Mbps Wi-Fi 2
  •  Serial (RS232/422/485), IO
  •  4-PIN DC with Ignition Sensing
  •  802.3at/af, 24~57V Passive PoE
  •  IP30, -40~75°C (-40~167°F), EN61373
  •  Level 4 EMC Protection
  •  DIN-Rail, Wall-Mount

Description

Model Version IR04 1.0
CPU CPU Details 580 MHZ Single-Core, MIPS24KEC
Memory/Storage Flash/ROM 16 MB (128 Mbit) NOR
DDR/RAM 128 MB (1 Gbit) DDR2
Cellular Cellular Standards 4G Cat. 4
Cellular Antennas 2× Detachable
Detachable Cellular Antennas Connector SMA Female
SIM Options 2× Mini SIM Slots (2FF)
Available Versions EU, US, ME, LA
EU Version Cellular Suitable Region Europe, Middle East, Africa, SEA, Australia, New Zealand
Max DL Speed 150 Mbps (LTE-FDD), 130 Mbps (LTE-TDD)
Max UL Speed 50 Mbps (LTE-FDD), 30 Mbps (LTE-TDD)
Advanced DL 2×2 MIMO
Cellular Bands LTE-FDD: B1/3/5/7/8/20/28
LTE-TDD: B38/40/41
WCDMA: B1/5/8
US Version Cellular Suitable Region United States, Canada
Max DL Speed 150 Mbps
Max UL Speed 50 Mbps
Advanced DL 2×2 MIMO
Cellular Bands LTE-FDD: B2/4/5/12/13/14/66/71
WCDMA: B2/4/5
LA Version Cellular Suitable Region Latin America, Australia, New Zealand
Max DL Speed 150 Mbps (LTE-FDD), 130 Mbps (LTE-TDD)
Max UL Speed 50 Mbps (LTE-FDD), 30 Mbps (LTE-TDD)
Advanced DL 2×2 MIMO
Cellular Bands LTE-FDD: B1/2/3/4/5/7/8/28/66
LTE-TDD: B40
WCDMA: B1/2/4/5/8
GSM: B2/3/5/8
ME Version Cellular Max DL Speed 150 Mbps (LTE-FDD), 130 Mbps (LTE-TDD)
Max UL Speed 50 Mbps (LTE-FDD), 35 Mbps (LTE-TDD)
Advanced DL 2×2 MIMO
Cellular Bands LTE-FDD: B1/3/5/7/8/20/28
LTE-TDD: B38/40/41
WCDMA: B1/8
GSM: B3/8
Wireless 2.4 GHz Wi-Fi Speed 300 Mbps
2.4 GHz Wi-Fi Streams 2T2R (2×2 MIMO)
Wi-Fi Antennas 2× Detachable
Detachable Wi-Fi Antennas Connector RP-SMA Female
FEM or PA/LNA 2.4 GHz: 2× Internal
Range Performance Max: 130 m (427 ft)
Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions.
Wall Performance One wooden walls with thickness < 10 cm (4”)
One concrete wall with thickness < 10 cm (4”)
Interfaces Physical Buttons Reset Button
10/100 Mbps RJ45 Ports 4
Ethernet Notes Port 1 is WAN/LAN configurable, and the rest are LAN ports
USB Ports 1× USB 2.0
Industrial Sockets
  • 1× DB9
  • 1× 6-PIN
  • 1× 10-PIN
DB9 Protocols
  • RS232
  • RS422
  • RS485
6-PIN Industrial Socket Protocols
  • RS485
  • RS422
IO
  • 1× Digital Dry Input (0-1.2V for state 1 | 1.8-3V for state 0) and GND1
  • 1× Digital Galvanically Isolated Input (0-4V for state 0 | 9-30V for state 1) and GND2
  • 1× Digital Open Collector Output (Max. 30V⎓250mA) and 1× GND3
  • 1× +V (<30V) and GND 3 for External VCC for the Digital Output
  • 1× C & NO – Common and Normally Open contacts of the internal Non-Latching Relay respectively (Max. 24V⎓4A or 40V~4A)
  • 1× A and GND1 – ADC input. Analog voltage range: 0-24V. The input can be configured for 4-20 mA sensor protocol as current measurement (AcL)
Other IO 1× Ignition Sensing and GND on the 4-PIN Power Connector
LED
  • Power
  • Cellular
  • Cellular Signal Strength
  • Link/ACT of Each Ethernet Port
Power Input
  • DC Jack
  • PoE via Ethernet Port
  • 4-PIN DC
Power Input Note Only two PINs in the 4-PIN power ports are used for powering. The other two are used for ignition sensing.
Power Power Methods
  • DC
  • 802.3at/af PoE
  • Passive PoE
Power Methods Note The WAN/LAN port accepts 802.3at/af PoE. The LAN ports accept Passive PoE.
DC Input 12V 1A
DC Terminal Block Input 11-57V⎓
Passive PoE Input 24-57V, Max. 12W
Power Adapter Input: 100 ~ 240 V, 50/60 Hz AC
Output: 12V 1A DC
Max Power Consumption (W) 9.6W
Idle Power Consumption (W) 2.8W
Reliability Grounding Methods Grounding Point
EMC IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV
IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m
IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
IEC/EN 61000-4-6, Level 3 CS: 10V
IEC/EN 61000-4-8, Level 5 PFMF
IEC/EN 61000-4-9, Level 5
IEC/EN 61000-4-10, Level 5
Power Protection
  • Polarity Protection
  • Overvoltage Protection
  • Surge Protection
Shock IEC/EN 61373
Vibration IEC/EN 61373
Free Fall IEC/EN 60068-2-32
Ingress Protection Rating IP30
Environment Operating Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉)
Storage Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉)
Operating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
Certifications FCC, CE
Mechanical Casing Material Aluminum Alloy
Dimension Device:
129×114×50.6 mm
5.08×4.49×1.99 inches
Mounting Space:
164×130×52 mm
6.46×5.12×2.05 inches
Product Weight 462.0 g (16.3 oz.)
Installation
  • Wall-mount
  • DIN-Rail
Package Content
  • IR04
  • Power Adapter
  • Detachable Wi-Fi Antennas
  • Detachable Cellular Antennas
  • 6-PIN Connector
  • 10-PIN Connector
  • 4-PIN Connector
  • Ethernet Cable
  • SIM Adapter KIT
  • Mounting Kit
  • Installation Guide
Ordering Information Retail Package Weight EU: 935.0 g (32.98 oz.)
Retail Package Dimension 220×200×60 mm
8.66×7.87×2.36 inches
Units per Carton 10
Carton Net Weight EU: 9.4 kg (20.72 lbs)
Carton Gross Weight EU: 10.0 kg (22.05 lbs)
Carton Dimension 48.5×31.9×22.4 cm
19.09×12.56×8.82 inches

Reviews

There are no reviews yet.

Be the first to review “IR04”

Your email address will not be published. Required fields are marked *

Product Enquiry